Edited by Roby.Bra at 2013-05-05 01:08 |
New Zopo Zp810
SOFTWARE USABLE :
1) Drivers Mtk 6589 (Original from Zopo Services 32bit + 64bit) :
2) Attention please last release (23-03-2013)
i have made correction NEW VERSION !
"SP_Flash_Tool_zopomobileshop_quad_core_exe_v3 .130 4.0.119.zip"
The flash tool suitable for this quad core and 'the next!
3) Firmware Directly from zopomobile website: (Version ZP800H 4.2 ZP800H_130407 563.32M 2013-04-07)
4) Firmware EUROPE Directly from zopo: (Version ZP810 4.2.1 130409 310MB )
THIS IS THE PROCEDURE HOW TO ROOT ZP810 for Firmware 4.1
1)-Download the following package:
2)-Copy the following package on the SD card that is inside the file that you downloaded earlier:
3) - Turn off the phone
4) - Install the drivers on the first page of the Forum for the recognition of the same!
5) - Not open the phone .. NEVER connect it to a usb cable and try to see if it 'was recognized! (always phone in the off position)
6)- Launch flashtool.exe which is located inside the downloaded file.rar
7)- Select Menu 'file ---> open scatter loading file and go to select the file you scatter that is the folder!
8) At this point the program Flashtool clear voice only preloader and must remain selected only the voice of Recovery!
(you should always have had the phone off not connected)
9) Now from Flashtool click the Download button and go to connect the usb cable to the phone
10) you should see in a blink of an eye you are installing on the phone recovery (cwm).
11) just made everything close ... unplug the USB cable and remove the battery for a moment ......
12) Reconnect the battery and turn on the phone by holding down the POWER button + VOLUME button +
13) You should be entered in the Menu 'CWM Recovery
14) go to select zip file and select superuser!
15) Once done reboot and you will see that you have THE ROOT!
That 's it ... make operations easy!
DO NOT rush!
THIS IS THE PROCEDURE HOW TO ROOT ZP810 for Firmware 4.2
I give you the procedure more 'easy to install and the new Rom that the recovery of CWM!
1) Unzip the firmware file to a folder eg. zp800 firmware v 4.2.1
2) Copy recovery.img and replace the files in the folder rom and the file lk.bin http://www.4shared.com/rar/a33w3iNz/ZP810130409_zopomobileit.html
Recovery cwm vers Mod for rom 4.21 with file lk-bin (access in CWM menu with power button + volume + ) http://www.4shared.com/rar/xB8ETpag/421.html Recovery cwm vers. 6032 for rom 4.21 (access in CWM menu with mtkdroidtools) http://www.4shared.com/rar/-CFZF ... 2_per_rom_421_.html
Recovery cwm vers. 6032 for rom 4.21 with file lk-bin (access in CWM menu with power button + volume + ) http://www.4shared.com/rar/pgqFp ... 2_per_rom_421_.html
Recovery cwm vers. 5504 for rom 4.21 (access in CWM menu with mtkdroidtools) http://www.4shared.com/rar/lTrDq ... 4_per_rom_421_.html
3) Launch new Flashtool vers quad_core_exe_v3.1304 .0.119 and select all the files (Tick all) and flash all with the download button!
4) Then copy the sd card in a Superuser:
5) Enter mode 'recovery of CWM and select and run superuser ....
You're done! Now you have the new Rom with Root rights!
This in my opinion seems to be the procedure most 'fast!
Tell and write some things that is not correct according you!
Thanks ZOPO to open this Forum!!
See you later