| |

Zopo Mobile Forum

 Forgot password?
 Register
Search
Hot search: ZP980 ZP950 zp998 ROM
View: 80690|Reply: 309

[ZP980&C2] How to upgrade NEW firmware for Zp980 16gb Normal Version   [ Promote this link! ]

Rank: 8Rank: 8

Post time: 2013-04-19 18:09:46
|Show all posts
Edited by Roby.Bra at 2013-11-09 12:38

This is New Zopo zp980 16Gb Normal Version


Many customers have found that in the international market are coming models without labels in the rear panel under the battery.
Other models put on the market have different colors from the ones put into the market earlier.
For this reason attention only to the labels left under the rear cover inside the battery compartment.


(Attention to the rear panel under the battery because some old version are grey rear panel
but now new models seems to have black rear panel)


Easiest way to know phone revision is to check if you have B/FC sticker under battery.
If not present under the battery compartiment , your phone at 90 % probably is NORMAL VERSION.
And so this is the situation:
NO STICKER UNDER THE REAR COVER = 90% ( probably more) IS NORMAL VERSION
Not followed  the colors of rear compartiment because now there are several colors grey and black that become you in crazy think!



New Zopo 980 Quad core is Arrived!
In this new section of ZOPO 980 we will discuss:
Android system
Firmware upgrade
Custom firmware.

Everybody are Welcome

All the instructions are described down in this Thread to install:

1) Original Firmware  
NOW zopo zp980 Version 083807
2) Actual Firmware is 20130610-083807


zopo_zp980_scorpio_quadcore_13mp_8.jpg
picture normal zp980.jpeg

Rank: 8Rank: 8

Post time: 2013-04-19 18:10:07
|Show all posts
Edited by Roby.Bra at 2013-08-11 23:14

zopo zp980 support OTA
update to latest firmware are much more easier,  update just "click to update"
but you don't have installed Cwm or twrp recovery!


Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-19 18:10:30
|Show all posts
Edited by Roby.Bra at 2013-08-11 15:29

Tutorial to upgrade to recovery and root Zopo zp980




1) Pre requirements Drivers mtk 6589. properly installed for recognize from the Pc the Zopo 980

    installed in to Pc with windows Xp is prefered.


  http://www.4shared.com/zip/ykW0IGDv/Driver.html
  One other way to install drivers is to InstallAll Drivers With the Program Snapea,
  http://www.4shared.com/zip/Y_F6KBCe/...sb_driver.html
  or
  http://www.4shared.com/rar/5wokI0ev/...NDROID__B.html

or SNAPPEA PROGRAM
  http://dl.snappea.com/release/SnapPea_2.36.0.2265_newuser.exe


2)Flashtoolvers installed in to one folder (ex. Desktop) Pc with windows Xp isprefered :

     New version of FLASHTOOL SP_Flash_Tool_v3.1316.0.150
    http://www.4shared.com/zip/RHJJa ... exe_v313160150.html
   FLASHTOOL SP_Flash_Tool_v3.1312.0.139
   https://mega.co.nz/#!NIom2TKB!ab ... 68sNUjwsMgXE4XsgfuQ


3)Recovery  - CWM  (Clockworkmod)  Only file recovery.img:


  CWM recovery vers.5504
  http://www.4shared.com/rar/fhngRy3u/cwm_980_VERS_5504.html

  CWM recovery vers.6030
  http://www.4shared.com/rar/52AkWFig/cwm_980_vers_6030.html

  CWM recovery vers.6032
  http://www.4shared.com/rar/KXYWFgYX/cwm_980_VERS_6032.html


  For all procedure How to root zopo980 see this Thread:
  http://forum.zopomobileshop.com/forum.php?mod=viewthread&tid=337&fromuid=13412


5) Firmware Zp980 20130410-140807 (original firmware)
    https://mega.co.nz/#!QVAziIxY!Ft ... Lt9rH44UL5ax79vrBJ8
  
    Firmware Zp980 20130422-211821 (Pubblished 26-04-2013) Not upgrade several bugs in it
    https://mega.co.nz/#!NFJCCSDQ!In ... mO0QEk5uYCzO-KDMyHo
   
   Firmware Zp980 20130516-161100 (original firmware)
   https://mega.co.nz/#!JBoWnCqR!PD ... u-BO4VGdeqTKdqtevT4
   Firmware Zp980 20130521- 152918 v3.1 (original firmware)
   https://mega.co.nz/#!QBZwVYaL!Gf ... J8NkR8JZogI0sZjg_nI

    FIRMWARE Original ZP980 16gb Normal version = 20130610-083807
    http://pan.baidu.com/share/link? ... 35&uk=605400177
    + preloader "normal " version
    http://www.4shared.com/rar/f6jU6 ... n_normal_0610-.html



5) Root SuperUser for firmware 4.2
   http://www.4shared.com/zip/UgvRsbLF/SuperSU_125_Pro.html
   Version new 1.30
   http://www.4shared.com/zip/jGkcA6MW/SuperSU-v130.html
  Version new 1.34
  http://www.4shared.com/zip/CecRs9lE/UPDATE-SuperSU-v134.html

STEP1



Unzip the drivers mtk6589.rar in afolder on your desktop

or snappea program more easy.

Thefirststep

from the folder run the file installDriver.exe once the operation is complete


Disconnect the phone from the usb socket and insert the battery without turning it on.

Now you have the computer ready to flash the complete firmware or parts of it,
prerequisite for any operation.

Unpack the package Flashtool folder on your desktop andrun Flash_tool.exe obtained (blue icon)






IN THIS POINT YOU HAVE TWO WAY TO PROCEED:

(Read all the tutorial don’tstop to read on to the end)


FIRMWARE UPGRADE

1) WAY TO INSTALL TOGETHERTHE RECOVERY IMAGE (CWM) AND THE FIRMWARE

(more easy)



Unzipthe file CWM_RECOVERY zopo980 in a folder onyour desktop and select “Recovery.img” and copy it in the folder with is decompressed the firmware !

Butin that folder is already present one other file that is called in the samename don not replace it but copy the original file in one new folder named“original file”


Inthis way you have always onefile original with the one recovery original (Factory)!

Notis the file recovery of CWM .


Now you have copied the file recovery.img (recovery CWM ) from the folder that you have decompressed (CWM_RECOVERY_zp980) to the folder of firmware!

and follows the step (2) install only the firmware.




UPGRADE ONLY FIRMWARE

2)INSTALL ONLY THE FIRMWARE

Runthe program Flashtool 4.1 blu icon!

Inthe program to your right you will find the voice Scatter.loading click on it and find the position the folder where you extracted the package firmware:

firmware zp980XXXXXXX

Android_scatter_emmc and confirmed

select all itemsfrom the menu of the program and leavechecked only thoserelating to recovery The situation will present in this way:



Immagine flashtool 4.jpg(159.53 KB, Downloads: 10)







Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-19 18:10:48
|Show all posts
Edited by Roby.Bra at 2013-04-27 18:11

Clickto download and confirm the popup that appears.
Now connect the phone OFF with battery correctly fitted to the PC USB cable.


Start 'flash process for the recovery will be'some minutes.

Apop-up will give you confirmation of the operation soyou can close the program and disconnect your phone!

NOW YOU DON’T REMOVE THE BATTERY IN THIS STEP !

BECAUSE YOU MUST ENTER IN BRICK PROCEDURE!


Nowyou can reboot the phone pushing the power button ,

and wait for some operation that need to the phone,

andenjoy the new Firmware and recovery CWM .

Enter in thephone and follow the steps that it need!


Now you can follow to the ROOT procedure or step (in this guide) to install it!




ROOT


First you have sd card and copy this file that you have downloaded before

SUPERUSER xxxxx.zip

and put in the sd card in the phone .

To enter in the recovery menu,

you need the one program mtkdroidtools ...


http://www.4shared.com/rar/SIZQYYL3/MtkDroidTools_v242.html


start the phone in normal mode .....run this program mtkdroidtools....connect the usb cable and wait for recognize it.....only after run the button down in this program reboot...and reboot in recovery mode.


enter the menu 'select zip file from sd card ... select the zip file you copied earlier:
root-superuser-xxxxx-zip
and confirmed!


At this point I have root privileges!
Turn off and turn on the phone!


Sometimes there off and on the phone automatically returns to the menu 'recovery, then you need todisconnect the battery for a few secondsand turn on the phone you will see that the phone will start right this time.



2) WAY TO INSTALL ONLY THE RECOVERY FROM RECOVERY IMAGE

Unpackthe package Flashtool folder onyour desktop and run Flash_tool.exe obtained (blue icon)

Runthe program Flashtool 4.1 blu icon!
In the program to your right you will find the voice Scatter.loading click on it and position the folder where you extracted the Firmware package  ZP980xxxxxxx and

Select the file: Android_scatter_emmc and confirmed
Deselect all items from the menu of the program and leave checked only thoserelating to recovery and preloader

The situation will present in this way:





flashtool only recovery.JPG(158.8 KB, Downloads: 0)



Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-19 21:04:36
|Show all posts
Edited by Roby.Bra at 2013-04-19 21:10

Clickto download and confirm the popup thatappears.
Now connect the phone OFF with battery correctly fitted

And only now connect the PC USB cable to the phone.


Start'flash process for the recovery will be' very short.
A pop-up will give you 'confirmation of the operation so you candisconnect your phone and enjoy thenew recovery


For those who have difficulty to recognize the phoneto recommend todouble check the correct installation of the drivers and toconnect and disconnect the USBcable to the phone several

times waiting a minute between one operation to another.



3) WAY TO INSTALL THE RECOVERY (CWM ) FROM RECOVERY IMAGE


Unpack the package Flashtool folder on your desktop andrun Flash_tool.exe obtained (blue icon)

Runthe program Flashtool 4.1 blu icon!


Inthe program to your right you will find the voice Scatter.loading click on it and position the folder where you extracted the package CWM_RECOVERY zp980

Selectthe file: Android_scatter_emmc and confirmed (CWM_RECOVERYzp980)


You must have this follows items selected from the menu of the program and leave checked only thoserelating to recovery cwm  (folder).

IFYOU HAVE SELECTED THE CORRECT SCATTER IN THE FOLDER CWM)

Thesituation will present in this way:



flashtool recovery cwm.JPG(97.3 KB, Downloads: 0)




Click to download and confirm the popup thatappears.
Now connect the phone OFF with battery correctlyfitted


And only now connect the PC USB cableto the phone.

Start 'flash process for the recovery will be' very short.
A pop-up will give you 'confirmation of the operation so you can disconnect your phone and enjoy the new recovery CWM.

Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-22 23:09:53
|Show all posts
In this section you find the procedure to have right root

Section:How to Root and How Upgrade Zopo Zp980
http://forum.zopomobileshop.com/ ... 7&fromuid=13412

Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-22 23:10:15
|Show all posts

Install new original firmware mod with Cwm menu and new partition 2,46

Edited by Roby.Bra at 2013-05-25 15:12

Install new partition 2,46

This is the link:
http://www.4shared.com/zip/LnOJrwFU/246gb_space_zp980-800.html


Follows the details to install the Firmware on step up in this guide .

The procedure is very easy........

copy these two files  (ebr1 and ebr2)  into the firmware folder and replace the original

(if you want to save the original put in new folder like...original partition..)

Y
ou must select all the flag in flashtools program and mke upgrade firmware!

The phone must be in off mode..

After this step you must only install superuser for receive right root

See post
on step (4) up in this guide post in section "ROOT" !

And the game is made!

Now you have new system partition to 2,46gb space !

Use magic Report

Rank: 1

Post time: 2013-04-24 14:07:16
|Show all posts
Edited by Kamino at 2013-04-24 14:12

The pictures you posted are from Zopo C2, not ZP980, C2 has printed on back yunos.com while ZP980 not...

Instead same pictures alll over, we would like to see a teardown so we have an idea what is actually in, ie if CMOS camera, what manufacturer, kind of lens, power of the flash, what is the true resolution, if is interpolated or not, what type of audio chip, if is Yamaha on both models and so on...

Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-25 15:13:57
|Show all posts
Sorry for my mistake!

Use magic Report

Rank: 8Rank: 8

Post time: 2013-04-25 15:15:47
|Show all posts
When is pubblished the new firmware i adjust the links in this first page!
But the procedure is ok!

Use magic Report

You have to log in before you can reply Login | Register

Happy Women's Day! Save $10 when you buy ZP998 ZP990+ ZP980+

Archive | Mobile | Zopo Mobile Forum

2014-04-20 18:47 GMT+8 , Processed in 0.039891 sec., 13 queries

To Top